In determining the poverty status of families and unrelated individuals, the Census Bureau uses thresholds (income cutoffs) arranged in a two-dimensional matrix. The matrix consists of family size (from one person to nine or more people) cross-classified by presence and number of family members under 18 years old (from no children present to eight or more children present). Unrelated individuals and two-person families are further differentiated by age of reference person (householder) (under 65 years old and 65 years old and over).

To determine a person's poverty status, one compares the person's total family income in the last 12 months with the poverty threshold appropriate for that person's family size and composition (see example below). If the total income of that person's family is less than the threshold appropriate for that family, then the person is considered "below the poverty level," together with every member of his or her family. If a person is not living with anyone related by birth, marriage, or adoption, then the person's own income is compared with his or her poverty threshold. The total number of people below the poverty level is the sum of people in families and the number of unrelated individuals with incomes in the last 12 months below the poverty threshold.

Since ACS is a continuous survey, people respond throughout the year. Because the income questions specify a period covering the last 12 months, the appropriate poverty thresholds are determined by multiplying the base-year poverty thresholds (1982) by the average of the monthly inflation factors for the 12 months preceding the data collection. See the table in Appendix A titled "Poverty Thresholds in 1982, by Size of Family and Number of Related Children Under 18 Years (Dollars)," for appropriate base thresholds. See the table "The 2012 Poverty Factors" in Appendix A for the appropriate adjustment based on interview month.

For example, consider a family of three with one child under 18 years of age, interviewed in July 2013 and reporting a total family income of $14,000 for the last 12 months (July 2012 to June 2013). The base year (1982) threshold for such a family is $7,765, while the average of the 12 inflation factors is 2.35795. Multiplying $7,765 by 2.35795 determines the appropriate poverty threshold for this family type, which is $18,309. Comparing the family's income of $14,000 with the poverty threshold shows that the family and all people in the family are considered to have been in poverty. The only difference for determining poverty status for unrelated individuals is that the person's individual total income is compared with the threshold rather than the family's income.

Poverty status was determined for all people except institutionalized people, people in military group quarters, people in college dormitories, and unrelated individuals under 15 years old. These groups were excluded from the numerator and denominator when calculating poverty rates.

Specified poverty levels are adjusted thresholds that are obtained by multiplying the official thresholds by specific factor. Using the threshold cited from the previous example (a family of three with one related child under 18 years responding in July 2013), the dollar value at 125 percent of the poverty threshold was $22,886 ($18,309 x 1.25).

Income deficit represents the difference between the total income in the last 12 months of families and unrelated individuals below the poverty level and their respective poverty thresholds. In computing the income deficit, families reporting a net income loss are assigned zero dollars and for such cases the deficit is equal to the poverty threshold.

This measure provides an estimate of the amount, which would be required to raise the incomes of all poor families and unrelated individuals to their respective poverty thresholds. The income deficit is thus a measure of the degree of the impoverishment of a family or unrelated individual. However, please use caution when comparing the average deficits of families with different characteristics. Apparent differences in average income deficits may, to some extent, be a function of differences in family size.

Aggregate income deficit refers only to those families or unrelated individuals who are classified as below the poverty level. It is defined as the group (e.g., type of family) sum total of differences between the appropriate threshold and total family income or total personal income. Aggregate income deficit is subject to rounding, which means that all cells in a matrix are rounded to the nearest hundred dollars. (For more information, see "Aggregate" under "Derived Measures.")

Mean income deficit represents the amount obtained by dividing the aggregate income deficit for a group below the poverty level by the number of families (or unrelated individuals) in that group. (The aggregate used to calculate mean income deficit is rounded. For more information, see "Aggregate Income Deficit.") As mentioned above, please use caution when comparing mean income deficits of families with different characteristics, as apparent differences may, to some extent, be a function of differences in family size. Mean income deficit is rounded to the nearest whole dollar. (For more information on means, see "Derived Measures.")

Since poverty is defined at the family level and not the household level, the poverty status of the household is determined by the poverty status of the householder. Households are classified as poor when the total income of the householder's family in the last 12 months is below the appropriate poverty threshold. (For nonfamily householders, their own income is compared with the appropriate threshold.) The income of people living in the household who are unrelated to the householder is not considered when determining the poverty status of a household, nor does their presence affect the family size in determining the appropriate threshold. The poverty thresholds vary depending upon three criteria: size of family, number of children, and, for one- and two- person families, age of the householder.

Question/Concept History -

Derivation of the Current Poverty Measure

When the original poverty definition was developed in 1964 by the Social Security Administration (SSA), it focused on family food consumption. The U.S. Department of Agriculture (USDA) used its data about the nutritional needs of children and adults to construct food plans for families. Within each food plan, dollar amounts varied according to the total number of people in the family and the family's composition, that is, the number of children within each family. The cheapest of these plans, the Economy Food Plan, was designed to address the dietary needs of families on an austere budget.

Since the USDA's 1955 Food Consumption Survey showed that families of three or more people across all income levels spent roughly one-third of their income on food, the SSA multiplied the cost of the Economy Food Plan by three to obtain dollar figures for total family income. These dollar figures, with some adjustments, later became the official poverty thresholds. Since the Economy Food Plan budgets varied by family size and composition, so too did the poverty thresholds. For two-person families, the thresholds were adjusted by slightly higher factors because those households had higher fixed costs. Thresholds for unrelated individuals were calculated as a fixed proportion of the corresponding thresholds for two-person families.

The poverty thresholds are revised annually to allow for changes in the cost of living as reflected in the Consumer Price Index for All Urban Consumers (CPI-U). The poverty thresholds are the same for all parts of the country; they are not adjusted for regional, state, or local variations in the cost of living.

Limitation of the Data - Beginning in 2006, the population in group quarters (GQ) is included in the ACS. The part of the group quarters population in the poverty universe (for example, people living in group homes or those living in agriculture workers' dormitories) is many times more likely to be in poverty than people living in households. Direct comparisons of the data would likely result in erroneous conclusions about changes in the poverty status of all people in the poverty universe.

Comparability - Because of differences in survey methodology (questionnaire design, method of data collection, sample size, etc.), the poverty rate estimates obtained from American Community Survey data may differ from those reported in the Current Population Survey, Annual Social and Economic Supplement, and those reported in Census 2000. Please refer to (http://www.census.gov/acs) and enter "Poverty Rate Estimates" in the ACS website search box.

The sex ratio represents the balance between the male and female populations. Ratios above 100 indicate a larger male population, and ratios below 100 indicate a larger female population. This measure is derived by dividing the total number of males by the total number of females and then multiplying by 100. It is rounded to the nearest tenth.

Question/Concept History

Sex has been asked of all persons living in a household since the 1996 ACS Test phase. When group quarters were included in the survey universe in 2006, sex was asked of all person in group quarters as well.

Beginning in 2008, the layout of the sex question response categories was changed to a horizontal side-by-side layout from a vertically stacked layout on the mail paper ACS questionnaire.

Limitation of the data

Beginning in 2006, the population in group quarters (GQ) was included in the ACS. Some types of GQ populations have sex distributions that are very different from the household population. The inclusion of the GQ population could therefore have a noticeable impact on the sex distribution. This is particularly true for a given geographic area. This is particularly true for areas with a substantial GQ population.

The Census Bureau tested the changes introduced to the 2008 version of the sex question in the 2007 ACS Grid-Sequential Test (http://www.census.gov/acs). The results of this testing show that the changes may introduce an inconsistency in the data produced for this question as observed from the years 2007 to 2008.

Comparability

Sex is generally comparable across different data sources and data years. However, data users should still be aware of methodological differences that may exist between different data sources if they are comparing American Community Survey sex data to other data sources, such as Population Estimates or Decennial Census data. For example, the American Community Survey data are that of a respondent-based survey and subject to various quality measures, such as sampling and nonsampling error, response rates and item allocation. This differs in design and methodology from other data sources, such as Population Estimates, which is not a survey and involves computational methodology to derive intercensal estimates of the population. While ACS estimates are controlled to Population Estimates for sex at the nation, state and county levels of geography as part of the ACS weighting procedure, variation may exist in the sex structure of a population at lower levels of geography when comparing different time periods or comparing across time due to the absence of controls below the county geography level. For more information on American Community Survey data accuracy and weighting procedures, please see the ACS website (http://www.census.gov/acs).

It should also be noted that although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau's Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties. See http://factfinder2.census.gov for data.

The median age is the age that divides the population into two equal-size groups. Half of the population is older than the median age and half is younger. Median age is based on a standard distribution of the population by single years of age and is shown to the nearest tenth of a year. (See the sections on "Standard Distributions" and "Medians" under "Derived Measures.")

The age dependency ratio is derived by dividing the combined under 18 years and 65 years and over populations by the 18-to-64 population and multiplying by 100.

The old-age dependency ratio is derived by dividing the population 65 years and over by the 18-to-64 population and multiplying by 100.

The child dependency ratio is derived by dividing the population under 18 years by the 18-to-64 population, and multiplying by 100.

Question/Concept History

The 1996-2002 American Community Survey question asked for month, day, and year of birth before age. Since 2003, the American Community Survey question asked for age, followed by month, day, and year of birth. In 2008, an additional instruction was provided with the age and date of birth question on the American Community Survey questionnaire to report babies as age 0 when the child was less than 1 year old. The addition of this instruction occurred after 2005 National Census Test results indicated increased accuracy of age reporting for babies less than one year old.

Limitation of the Data

Beginning in 2006, the population living in group quarters (GQ) was included in the American Community Survey population universe. Some types of group quarters have populations with age distributions that are very different from that of the household population. The inclusion of the GQ population could therefore have a noticeable impact on the age distribution for a given geographic area. This is particularly true for areas with a substantial GQ population. For example, in areas with large colleges and universities, the percent of individuals 18-24 would increase due to the inclusion of GQs in the American Community Survey universe.

Comparability

Caution should be taken when comparing population in age groups across time. The entire population continually ages into older age groups over time, and babies fill in the youngest age group. Therefore, the population of a certain age is made up of a completely different group of people in one time period than in another (e.g. one age group in 2000 versus same age group in 2013). Since populations occasionally experience booms/increases and busts/decreases in births, deaths, or migration (for example, the postwar Baby Boom from 1946-1964), one should not necessarily expect that the population in an age group in one year should be similar in size or proportion to the population in the same age group in a different period in time. For example, Baby Boomers were age 36 to 54 in Census 2000 while they were age 48 to 66 in the 2013 ACS. The age structure and distribution would therefore shift in those age groups to reflect the change in people occupying those age- specific groups over time.

Data users should also be aware of methodology differences that may exist between different data sources if they are comparing American Community Survey age data to data sources, such as Population Estimates or Decennial Census data. For example, the American Community Survey data are that of a respondent-based survey and subject to various quality measures, such as sampling and nonsampling error, response rates and item allocation error. This differs in design and methodology from other data sources, such as Population Estimates, which is not a survey and involves computational methodology to derive intercensal estimates of the population. While ACS estimates are controlled to Population Estimates for age at the nation, state and county levels of geography as part of the ACS weighting procedure, variation may exist in the age structure of a population at lower levels of geography when comparing different time periods or comparing across time due to the absence of controls below the county geography level. For more information on American Community Survey data accuracy and weighting procedures, please see http://www.census.gov/acs.

It should also be noted that although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau's Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns, and estimates of housing units for states and counties (http://factfinder2.census.gov).